n-Hexane
正己烷
n-Hexane is a non-polar solvent for vegetable-oil extraction, rubber-cement formulation, and pharma synthesis. Chinese capacity is dominated by refinery-derived light-naphtha hexane cuts. UN 1208, IMDG Class 3 Packing Group II flammable; the neurotoxicity profile (peripheral neuropathy on chronic inhalation exposure) drives strict OSHA PEL and receiver-side handling requirements. Ships in stainless T11 ISO tanks for bulk and 200 kg HDPE drums for sample volume. Food-grade hexane for edible-oil extraction carries a tighter aromatics spec (under 50 ppm benzene typical) than industrial-grade. US imports do not carry Section 301 on bulk hexane at the time of writing. This cluster aggregates CAS 110-54-3 across the regulatory matrix and the substance-level CAS reference.
Glossary
Terms you will meet on this lane
-
Class 3, IMDG Class 3
The IMDG hazard class for flammable liquids, substances with a flash point of 60 degrees Celsius or below. Covers solvents, alcohols, ketones, esters, fuels, and many industrial intermediates routinely shipped from Chinese chemical factories. Subject to packing group I, II, or III based on flash point and initial boiling point.
-
PG I / II / III, Packing Group
Three-tier classification under the IMDG Code (and other transport regulations) indicating the relative severity of hazard within a dangerous-goods class. PG I is the most hazardous (great danger), PG II is medium danger, PG III is minor danger. Determines the required packaging strength and the regulatory burden of the shipment.
-
UN Number, UN Number
A four-digit identifier assigned by the United Nations Committee of Experts on the Transport of Dangerous Goods to identify a hazardous substance for international transport. Required on the DG Declaration, the package marking, the placards on the container, and Section 14 of the MSDS.
-
DG Declaration, Dangerous Goods Declaration
A signed shipper's document required for every dangerous-goods sea shipment, certifying that the cargo has been properly classified, packaged, marked, labelled, and is in the proper condition for transport. Issued under the IMDG Code on the IMO Multimodal Dangerous Goods Form.
-
MSA China / 海事局, Maritime Safety Administration of China
The Chinese government authority responsible for maritime safety, ship registration, port-state control, and the regulation of dangerous goods carried by sea on Chinese-flagged vessels and in Chinese ports. Reports to the Ministry of Transport. MSA China issues the Dangerous Goods Container Packing Certificate (危险品集装箱适装证明) that every DG export shipment from China must carry, alongside other operational permits for chemical cargo movement.
-
ISO Tank, ISO Tank Container
A stainless-steel or alloy-steel cylindrical pressure vessel mounted in a 20-foot ISO container frame, designed for the transport of bulk liquids and gases. Capacities typically 18-26 cubic metres (16-25 MT depending on cargo density). UN portable tank instructions cover four families: T1 to T22 for liquids and solids of Classes 1 and 3 to 9, T23 for Class 4.1 self-reactive substances and Class 5.2 organic peroxides, T50 for non-refrigerated liquefied gases, and T75 for cryogenic liquefied gases. ISO tanks carry the bulk of the world's hazardous liquid chemical trade and compete with parcel tankers at different scales.
-
SDS, Safety Data Sheet
The 16-section document that communicates the hazards, handling, storage, and emergency response information for a chemical product. Required at destination customs for any classified hazardous chemical and at the buyer's site for worker safety. SDS is the GHS-aligned successor to the older MSDS format.
-
COA, Certificate of Analysis
A document issued by the manufacturer (or by an accredited third-party lab) certifying that a specific batch of a chemical or material meets the agreed specification. Lists tested parameters, results, the test methods used, and a batch number that ties back to production.
-
FOB, Free On Board
Incoterm under which the seller delivers the goods on board the vessel at the named port of shipment. Risk and cost transfer to the buyer once the cargo crosses the ship's rail. The buyer arranges and pays for sea freight, marine insurance, and all destination-side costs.
-
CIF, Cost, Insurance, and Freight
Incoterm under which the seller is responsible for the cost of the goods, marine insurance, and sea freight to the named destination port. Risk transfers from seller to buyer when the goods are loaded on board at the origin port, but cost responsibility extends to destination port arrival.
Regulatory matrix
Cross-jurisdiction compliance
-
n-Hexane under REACH
European Union listing status, classifications, importer obligations.
-
n-Hexane under TSCA
United States of America listing status, classifications, importer obligations.
-
n-Hexane under IECSC
People's Republic of China listing status, classifications, importer obligations.
-
n-Hexane under AICIS
Australia listing status, classifications, importer obligations.
-
n-Hexane under K-REACH
Republic of Korea listing status, classifications, importer obligations.
ISO tank types
Freight-form references for the cargo
Sourzi operator note
Food-grade hexane on a vegetable-oil extraction lane is a different cargo from industrial-grade. The aromatics spec on the COA, not the boiling-range cut, decides the fit.
Curated by Sean. Primary-source verified per the regulatory drafting rules in Sourzi CLAUDE.md.
Sourcing n-hexane?
Send us the spec.
Our Shanghai team responds within 24 hours with factory-direct pricing, the documentation chain mapped out, and the duty stack quantified before you commit a deposit.
Request a QuoteFree download
Free PDF: thirty-point factory audit checklist used on every Sourzi site visit before a first shipment.